SP 560

Compact UPS that delivers big time protection

SP 560 Overview

The compact SP 560 from Clary delivers on-line protection 100% of the time, for reliable, continuous error-free operation, regardless of utility power quality. Occupying only 1U of vertical rack space, it can fit into any cabinet. Clary’s SP 560 is a 560VA/400W power source built for electronics equipment in IT, traffic and security applications, delivering constant, conditioned, regenerated AC power. It protects equipment from being disrupted, degraded or damaged due to harmful power events. Clary power conditioning completely isolates the cabinet from utility power enabling error-free operation during surges, sags, spikes, and other power anomalies. With an optional battery pack, the SP 560 system operates as an On-Line, Double-Conversion UPS, extending the reliability of the cabinet’s electronics during utility power failures (black-outs). The SP 560 is Power Factor Corrected to reduce utility current draw and wiring requirements. Designed for indoor/outdoor use, the Clary SP 560 will operate in temperature extremes from -40˚C to +74˚C (-40˚F to 165˚F) and it communicates locally or remotely via serial, USB or an optional web agent.

SP 560 Specifications

Voltage 120 VAC (85 VAC to 155 Vac before going to battery, when configured with batteries)
Voltage 120 VAC ±3%
Frequency Software selectable to sync with input utility or run at crystal controlled 50/60 Hz ±1 Hz
Current 4.8A
Rating 560 VA / 400 W
Crest Factor Ratio 50% load up to 4.8:1, 75% load up to 3.2:1, 100% load up to 2.4:1
THD 3.00%
Dynamic Response ±4% for 100% step load change 0.5 ms recovery time
Overload 110% for 10 sec; 200% for 50 ms
UPS Protection Input and output short circuit; input and output overload; excessive battery discharge
Temperature -40°C to +74°C (-40°F to +165°F)
Humidity 0% to 95% non-condensing
Altitude Sea level to 10,000 ft
Input IEC-320, C14 male connector
Outputs IEC-320, C13 female receptacles (2)
Dimensions H x W x D (in) 1.7 x 11.0 x 8.5 (1U)
Weight (lb) 5
Cooling Low velocity, Forced air
Standard Features Power factor corrected input, Fully regenerative, True on-line continuous power, Low distortion sine wave output, Designed for non-linear loads, Extended brownout protection
Certifications FCC Class A, IEEE 587/ANSI C62.4, IEC 555@ 120 VA, NEMA
Typical Recharge Time to 85% Capacity @ 100% Load 3 to 5 hrs (with extended battery option)
Visual Indicators Battery status, AC output, AC input, Alarm
Switches / Control Panel System power, Cold start, Load I
Audible Alarms Utility interrupt, Inverter failure, Overload, Low battery
Intelligent Computer Interfaces 1 each DB9-F (RS232 and signal interface pins) and 1 each USB

Contact us to learn more about our innovative products!
Contact Us