SP1250XLE

The SP1250 XLE is a full‐featured on‐line dual conversion UPS
rated for 1250 VA / 875 W that comes in a rack‐mounted 1U form
factor. Clary’s unique technology conditions utility power and
protects critical and valuable cabinet equipment from a broad
range of power disturbances. The SP1250 XLE is designed to
provide extended run time when confi gured with an available
lithium battery pack or a 4 battery AGM system ‐ allowing
traffi c to continue running smoothly even when utility power
is interrupted. When confi gured with Clary’s SP48LI X2 rack
mounted lithium battery pack, the entire UPS system takes up
only 3U of rack space. The SP1250 XLE is optimized to support
industry standard 332 style controller cabinets without the
need for a separate UPS or battery cabinet. The SP1250 XLE
boasts a variety of features including three contact closures,
built‐in SNMP communications and an OLED display.

The SP 1400LT is our space saving full-featured UPS for traffic systems. The LT Series are advanced UPS that provide clean, regulated dual conversion power for controllers and other sensitive equipment inside the traffic cabinet. Rated for 1400 VA / 1000 W, with operational temperature of -40°C to +74°C (-40°F to 165°F), the SP 1400LT has been independently tested and certified to comply with NEMA temperature standards as well as NEMA standards for shock and vibration. So small, lightweight and incredibly flexible in space, the SP 1400 LT can fit in almost all cabinets. Along with its batteries it can even fit in a compact pole mounted cabinet as little as 16″ H x 14″ W x 12″ D. The SP 1400LT provides continued operation during power loss for intersections using LED lights with either Lithium-Iron Phosphate or Lead Acid Batteries. Advanced communication features allow monitoring, configuration and control of the system over RS232, modem or network connections with SMNP. Available with battery bus voltages of 48 V or 72 V.

Here is the only UPS that puts you in full control of your system with 8 IP-addressable 15A 120V power outlets. Not only does the SP Captain provide continuous on‑line power conditioning that protects your ITS infrastructure against surges, sags, and spikes, it reduces maintenance costs as well by monitoring critical equipment and signaling the operations center when abnormalities occur. Remote control of power outlets allows rebooting equipment which can reduce unnecessary field inspection and service.

Our newest digital UPS is designed for ITS and traffic applications, including the new low-voltage ATC cabinets. It’s also plug and play with McCain cabinets.  It’s the only double conversion, true on-line UPS with both AC and DC power inputs and outputs, and it comes in a compact 1U rack-mounted package.  The SP 1250DLE-MC is designed for temperature extremes of ‑40°C to +74°C (-40°F to +165°F) and supports 85-155 VAC or 48 VDC input voltages, as well as generator input. The unit provides two 120 VAC outputs, two 48 VDC outputs and one  24 VDC output, up to an 875 watt maximum for all outputs combined.

The SP 2000LX features an integrated Power Interface Module and programmable display. The LX Series are advanced UPS that provide clean, regulated dual conversion power for controllers and other sensitive equipment inside the traffic cabinet. Rated for 2000 VA / 1400 W, with operational temperature of -40°C to +74°C (-40°F to 165°F), the SP 2000LX has been independently tested and certified to comply with NEMA temperature standards as well as NEMA standards for shock and vibration. Compatible with most existing traffic cabinets, the SP 2000LX can be rack or shelf mounted and can be configured with either front or rear power connectors. The SP 2000LX provides full operation in intersections with all LED traffic lights. Advanced communication features allow monitoring, configuration and control of the system over RS232, modem or network connections. Available with battery bus voltages of 96 V.

The S1500-601 is a medical grade UPS system designed specifically for medical applications, with on-line technology that conditions and regenerates power 100% of the time. Engineered to meet UL listing 60601-1, it is proven to work when the power fails.

The S1500-601 supports 1500VA or 1050 watts of load for 7 minutes of back-up time, and also supports either 120Vac or 230Vac input auto selecting, in fact, it will support input voltages as low as 96Vac and as high as 264Vac. Output voltage is 120Vac. This is a very low leakage unit that supports devices that directly contact the patient.

The S1500-601 also supports input from generator power, and because the S1500-601 is an on-line unit it protects the devices connected to it by eliminating electrical anomalies that harm or destroy costly equipment.

The SP 1250LX features an integrated Power Interface Module and programmable display. The LX Series are advanced UPS that provide clean, regulated dual conversion power for controllers and other sensitive equipment inside the traffic cabinet. Rated for 1250 VA / 875 W, with operational temperature of -40°C to +74°C (-40°F to 165°F), the SP 1250LX has been independently tested and certified to comply with NEMA temperature standards as well as NEMA standards for shock and vibration. Compatible with most existing traffic cabinets, the SP 1250LX can be rack or shelf mounted and can be configured with either front or rear power connectors. The SP 1250LX provides full operation in intersections with all LED traffic lights. Advanced communication features allow monitoring, configuration and control of the system over RS232, modem or network connections. Available with battery bus voltages of 48 V or 72 V.

The SP 1250LE Universal Power Conditioner is a power factor corrected 1250 VA/875 W device designed to enhance utility power or repair failing utility power in traffic, IT or security cabinets. Clary’s SP 1250LE can also operate as an on-line, dual conversion UPS when configured with the optional battery pack, which extends the reliability of the cabinet when the utility power fails (black out) or falters (brownout). The SP 1250LE system also protects the cabinet by insuring that no harmful power artifacts arrive at the cabinet to destroy or degrade the cabinet electronics. Clary’s industry proven on-line, true sine wave power protects the cabinet 100% of the time to insure reliable and continuous error-free operation. The SP 1250LE operates in extreme environments from -40°C to +74°C (-40°F to 165°F), and communicates via USB with monitoring center or other equipment. Power quality analytical data is recorded and exportable to Excel in CSV format.

The compact SP 560 from Clary delivers on-line protection 100% of the time, for reliable, continuous error-free operation, regardless of utility power quality. Occupying only 1U of vertical rack space, it can fit into any cabinet. Clary’s SP 560 is a 560 VA / 400 W power source built for electronics equipment in IT, traffic and security applications, delivering constant, conditioned, regenerated AC power. It protects equipment from being disrupted, degraded or damaged due to harmful power events. Clary power conditioning completely isolates the cabinet from utility power enabling error-free operation during surges, sags, spikes, and other power anomalies. With an optional battery pack, the SP 560 system operates as an on-line, double-conversion UPS, extending the reliability of the cabinet’s electronics during utility power failures (black-outs). The SP 560 is power factor corrected to reduce utility current draw and wiring requirements. Designed for indoor/outdoor use, the Clary SP 560 will operate in temperature extremes from -40°C to +74°C (-40°F to 165°F) and it communicates locally or remotely via serial, USB or an optional web agent.