The SP Series Model PD UPS
and Outpost™ Series batteries are designed for outdoor
use and will operate in extreme temperature environments of
-40°C to +74°C.
(-40°F to + 165°F)
SP1000PD-R/N - SP1250PD-R/N PLUS
- SP2000PD-R/N
UPS Systems for LED Traffic Signal
• Can keep an intersection running for up to 8 hours
or longer
• Does not compromise existing cabinet wiring
• Provides ON-LINE conditioned re-manufactured power
for cabinet equipment
• RS232 or TCP/IP- Communicates with monitoring center
or other equipment
• SP1000PD-R/N: 1,250 VA, 875 Watts, continuous power
• SP1250PD-R/N PLUS: 1,250 VA, 875Watts (1400 watts,
peak load 10 sec. or less)
• SP2000PD-R/N: 2,000 VA, 1,400 Watts, continuous power
• Multi-state DOT and NEMA compliant
• Optional NEMA 3R Type II and Type III cabinets available
• Power Factored Corrected
Outpost™ Series
AGM VRLA Batteries for Traffic Applications -40°C to +74°C
(-40°F to +165°F)
• Designed for outdoor applications
• Outlives any other battery in extreme environments
• Special connectors allow safe, rapid field replacement
• Configured in a set of six batteries (SP1000PD-R/N
& SP1250PD-R/N PLUS)
• Configured in a set of eight batteries (SP2000SR/SN/U)
SP1000PD-R/N - SP1250PD-R/N PLUS
Keeping intersections alive during power failures, Clary's
SP Series Model PD is the world’s most advanced Uninterruptible
Power System (UPS) for traffic applications. Without compromising
existing cabinet wiring, the SP Series, Model PD, keeps LED signal heads
running for up to 8 hours or more during power failures. Clary's
continuous power systems fit inside most existing cabinets
and meet all NEMA temperature specifications. Optional NEMA
3R Type II and Type III cabinets are available.
These systems also provide clean,
regulated power for controllers and other sensitive equipment
inside the cabinet. The SP1000PD-R/N systems are intended for
application where load usage will not exceed 875 watts. These
systems are also available with an extended load option the SP1250
PD-R/N PLUS will allow for 1400 watts peak load for a
ten second interval. This option accommodates intersections
that have not yet replaced the yellow incandescent traffic
lamps. Additionally, Clary can provide a SP2000PD-R/N system
that will sustain a continuous 1400 watt load. These systems
require eight batteries and additional cabinet space or a
separate cabinet such as the CBO-123 UPS cabinet.
Advanced communication features allow
monitoring, configuration and control of the system over RS232,
modem or network connections SNMP Product Brochure.
The SP Series, Model PD integrates the PIM function into the standard chassis.
The Power Interface Module (PIM) is designed and manufactured
to interface cabinet utility power to the SP Series traffic
systems and to control the output utility power within the
traffic cabinet.
OUTPOST BATTERIES
These 41Ah maintenance-free, Absorbent Glass Mat, Valve Regulated,
Lead Acid (AGM-VRLA) batteries are designed for deep cycle,
extreme temperature applications. They have been field tested
and used for years by the military. Absorbed Glass Mat (AGM)
technology assures a safe environment. Especially designed
for outdoor and extreme temperature applications, they are
capable of operating from -40°C to +74°C (-40°F
to +165°F). This makes them ideal for use with Clary’s
SP Series Model PD Traffic Signal solutions, IT/Communication UPS solution
or other extreme temperature applications.
|
