 |
|
|
|
|
|
|
|
|
|
| Redundant Parallel Architecture (RPA),
Optional (including bypass circuit) |
|
|
| Makes it possible to connect the output of up to four
units in parallel. This provides maximum reliability because
of redundancy of the system. Not only are the inverters
redundant but so is the by-pass logic control and the
battery systems. RPA protects your investment because
parallelism supports future up grade ability allowing
for investment only when you need it. |
|
| Superior Battery Management Features: |
|
|
| The S Series Superior Battery Management
(SBM) provides enhanced battery lifetime which increases
the economical life cycle of your investment |
|
| 1.Monthly Automatic Battery
and Calibration Testing |
|
|
| You will know before loss of data that
the batteries need to be replaced. Batteries wear out!
This feature provides an exact update of the actual battery
capacity, which enables accurate runtime prediction. |
|
|
|
| Boost charging enables fast recharging
of the batteries. In this way the S603 Series can also
backup the next blackout in a shorter period of time. |
|
| 3.Temperature Compensated Battery Charger |
|
|
| This feature provide for the most optimal charging of
the batteries which improves battery life. |
|
| 4. Load Dependent End-of-Discharge Voltage |
|
|
| This feature provide for maximum battery
capacity without over charging. Repeated over-charging
will result in failure to recover normal battery capacity
and reduces battery life. |
|
| |
|
| Improves battery life by preventing needless battery
discharge in cases where there is no load or no utility
power. |
|
|
|
| By selecting the ECO-mode the S603Series
operates on bypass continuously. On ECO-mode the unit
has a very high efficiency providing low energy usage.
The less heat generated also saves on air conditioning
energy costs. An excellent feature when applied to less
critical loads, like emergency lighting. |
|
| True On-line Double Conversion |
|
|
| Provides for the maximum system protection possible.
Protects your equipment from damage due to any disturbance
from the commercial power. |
|
| Protection against Overload, Short-circuit
and Over-temperature |
|
|
| Over-load, short-circuit and over temperature
protection reduces maintenance costs, and improves reliability. |
|
RS232 / SNMP Compatible Communication Interfaces
|
|
|
| Allows for monitoring and management of the UPS via
the network, using the SNMP protocol set. RS232 is standard
while the SNMP Interface is optional. |
|
| Emergency Power Off Feature (EPO) |
|
|
| Makes it possible to connect the S603 Series
to a fire alarm system should safety reasons require UPS
shutdown |
|
