Monrovia, CA: 800-442-5279 - 626-359-4486 Richmond, VA: 888-442-5279
 

 

 

 

All Clary CMN Series systems are custom manufactured devices that support Clary's POWER Channel technology, consult factory for availability.

Unlike commercial standby and hybrid UPS products, Clary's CMN Series products are designed and built to rugged specifications. All systems are digitally microprocessor controlled to provide clean, regulated power under all tactical conditions. All CMN Series systems are Power Factor Corrected (PFC) in real-time to ensure the highest possible efficiency. Full RS232 and SNMP interactive communications capability assures support of all types of command and control applications. 1,250/1,500/2,000/2,400 and 4000VA; 120 through 240 VAC input 45 to 65 Hz, 120 through 240VAC output; 50 or 60 Hz. UL listed.

Rack Mount
ET Models
Rack Mount
ST Models
Rating Watts
       
CMN1250ET CMN1250ST 1,250 VA 875
CMN1500ET CMN1500ST 1,500 VA 1,050
CMN2000ET CMN2000ST 2000 VA 1,400
CMN2400ET CMN2400ST 2400 VA 1,680
CMN3000ET CMN3000ST 3000VA 2,100
N/A CMN4000ST 4000 VA 2,800

• Small size - 5.25” - 3U Rack Space
• Power Factor Corrected to near unity
• Rackmount version fits into standard 19” Rack
• Outputs can be controlled remotely or from front panel (Optional)
• Software selectable configuration (output frequency, voltage, alarms, auto turn-off, etc.)
• Automatic bypass & battery test
• Unit can be started with out AC present (Cold Start)
• Many options available for custom configurations
• Transformer Isolation included

WARRANTY | BROCHURES | MANUALS

   
 
FEATURES
BENEFITS
Typical Input Voltage Range
120 VAC +12%, -25%; 90 to 135 VAC before switching to batteries
Assures continuous system operation during electrical surges and sags without switching to the batteries.
True On-Line Technology
True On-Line means Fully Regenerative, Dual Conversion operation. It assures complete isolation from voltage and frequency variations. Unlike “line-interactive,” “off-line” or “standby” systems, there is absolutely no interruption of power output or shift in line frequency to cause system crashes or resets. Clary UPS systems are compatibility with many emergency standby generator systems.
Full Microprocessor Control
Every aspect of system operation is monitored and controlled by the internal microprocessor. This assures flawless operation regardless of load, environmental or input power conditions. Clary has over 30 years experience designing with Digital Technology, which ensures reliability.
Power Factor Correction
Power Factor Correction eliminates distortion and harmonic currents caused by today’s high-tech loads. Eliminating this distortion assures that all of your equipment works together without problems. It also reduces your energy bill.
Communication and Control Interface’s
Allows interactive system control over a variety of network connections and communication interfaces - RS-232 (standard), Contact Closure and TCP/IP - SNMP (optional).
Complete Power Distribution Center
Custom rear panels are available with a variety of connectors to fit special applications.
Remote Control of Receptacles (Two Output Circuits)
Each row of output connectors can be individually switched on or off at the front panel. Locked-up devices are a fact of life and this control allows the user to reboot devices powered by the UPS. Using a communications link, a remote operator (and/or network administrator) can also control and monitor each circuit.
Long Life Internal Batteries

Special VRLA batteries that offer longer discharge and float life allow full system operation during blackouts and severe brownouts. (See specification page for run time.)

Additional Battery Options
For applications that require longer operation during a power outage, additional matching battery packs that can be connected to the rear panel and extend run times are available.
SNMP Option
SNMP capability via TCP/IP Network connection. Compatible with more software than any other UPS including HP Openview™, CA Unicenter TNG™, and other major software packages. SNMP Product Brochure
 

150 East Huntington Drive. | Monrovia,CA 91016 | Tel:800-442-5279 or 626-359-4486 | Fax:626-305-0254

Terms of Use COPYRIGHT © 2004 CLARY Corporation All rights reserved